Last updated: November 2026. Rewritten for the current edition, AS 5377:2022, which replaced AS/NZS 5377:2013.
AS/NZS 5377 was the Australian and New Zealand standard for handling e-waste. In Australia it has been replaced by AS 5377:2022, Management of electrical and electronic equipment for re-use or recycling, published by Standards Australia on 21 January 2022. It sets out principles and minimum requirements for the safe and environmentally sound collection and storage, transport, preparation for re-use and treatment of end-of-life electrical and electronic equipment.
Many recyclers, tenders and websites still quote “AS/NZS 5377” or “AS/NZS 5377:2013”. This guide explains what the standard is, what changed in the 2022 edition, where it is referenced in Australian rules, and how to check a recycler’s claims against it.
Key takeaways
- The current edition is AS 5377:2022. It supersedes AS/NZS 5377:2013 and is an Australian Standard, not a joint Australian and New Zealand one.
- The title changed from “Collection, storage, transport and treatment of end-of-life electrical and electronic equipment” to “Management of electrical and electronic equipment for re-use or recycling”.
- Preparation for re-use is now named in the scope, and the abstract also lists data security, traceability for substances of concern, risk management and quality management.
- The standard is voluntary on its own, but the National Television and Computer Recycling Scheme requires certified recyclers, and Western Australia’s e-waste regulations point to AS 5377:2022.
- Standards Australia publishes the standard but does not certify anyone. Certification comes from independent certification bodies after an audit.
What is AS 5377?
AS 5377 is the Australian Standard written specifically for the e-waste sector. It covers what happens to electrical and electronic equipment once its owner no longer wants it: how it is collected and stored, how it is moved, how it is prepared for re-use, and how it is treated to recover materials and deal with hazardous parts.
It was first published in 2013 as a joint standard, AS/NZS 5377:2013, developed by Standards Australia committee EV-019 (E-waste). The same committee is responsible for the 2022 edition. According to the published abstract, the current edition applies to equipment rated up to 1,000 V AC and 1,500 V DC.
The standard exists because e-waste carries two kinds of risk at once. It contains hazardous materials, such as lead in older CRT glass, mercury in some lamps and lithium-ion batteries that can catch fire when damaged. It also contains valuable materials, and often data. A common benchmark lets regulators, product stewardship schemes and buyers of recycling services judge whether a facility is handling those risks properly.
Is AS/NZS 5377 still current?
No. AS/NZS 5377:2013 has been superseded. The Standards Australia record for the 2022 edition lists it as superseding AS/NZS 5377:2013 and notes that the standard was “revised and redesignated as AS 5377:2022”. In other words, the review produced an Australian-only standard.
New Zealand is a separate question. Standards New Zealand ran a public comment period on a draft joint version, DR AS/NZS 5377:2022, from 31 July to 4 September 2025. At the time of writing we could not find a published joint edition. For work in Australia, the edition to cite is AS 5377:2022.
In practice, the two names are still used interchangeably. Many tender documents and websites say “AS/NZS 5377” when they mean the standard in general. Where precision matters, the current edition is AS 5377:2022.
What changed between the 2013 and 2022 editions?
The full text of AS 5377:2022 runs to 78 pages and is sold through Standards Australia, so a clause-by-clause comparison needs a copy of both editions. The published details show these changes:
| 2013 edition | 2022 edition | |
|---|---|---|
| Designation | AS/NZS 5377:2013 | AS 5377:2022 |
| Jurisdiction | Joint Australia and New Zealand | Australia |
| Title | Collection, storage, transport and treatment of end-of-life electrical and electronic equipment | Management of electrical and electronic equipment for re-use or recycling |
| Stages in scope | Collection, storage, transport and treatment | Collection and storage, transport, preparation for re-use, and treatment |
| Also named in the abstract | Not applicable | Data security, traceability for substances of concern, risk management and quality management |
| Published | 2013 | 21 January 2022 |
The change of title is the clearest signal. The 2013 edition was framed around waste. The 2022 edition is framed around managing equipment “for re-use or recycling”, which puts refurbishment and re-use alongside materials recovery rather than treating every device as scrap.
What does AS 5377 cover?
The standard is organised around the stages equipment moves through after it is discarded. The summaries below describe what each stage is about and the risks involved. They are not a substitute for the clauses themselves.
Collection and storage
This is where damage most often happens. Cracked screens, crushed batteries and leaking components create safety and contamination risks before any processing starts. Storage matters because e-waste tends to build up in volume before it is processed, so weather protection, fire risk and separation of hazardous items all come into play.
Transport
Moving e-waste between sites raises load security, packaging and dangerous goods questions, particularly for lithium-ion batteries. Transport is also where traceability is most likely to break down, because equipment changes hands.
Preparation for re-use
Now named in the scope, this stage covers equipment that is tested, repaired or refurbished so it can be used again, instead of being dismantled. Re-use keeps the most value in a device, but it also means data-bearing equipment returns to circulation. That makes data sanitisation and records especially important at this stage.
Treatment
Treatment is the dismantling, separation and processing of equipment to recover materials such as metals, plastics and glass, and to remove hazardous components for specialist handling. It is also where downstream accountability matters: material that leaves a facility should go somewhere that handles it properly.
Data security, traceability, risk and quality
The 2022 abstract lists four further topics: data security, traceability for substances of concern, risk management and quality management. For organisations disposing of computers, phones and storage media, data security is usually the first concern. AS 5377 is an e-waste standard, not a data sanitisation method. Sanitisation techniques are set out in guidelines such as NIST SP 800-88 and IEEE 2883, and, for government systems, the Australian Signals Directorate’s Information Security Manual.
Is AS 5377 mandatory in Australia?
Australian Standards are voluntary documents. They become binding only when a law, a scheme or a contract calls them up. AS 5377 is called up in several places that matter to anyone recycling e-waste:
- National Television and Computer Recycling Scheme (NTCRS). Since 1 July 2016, the scheme’s co-regulatory arrangements have had to ensure that all recycling under the scheme is done by e-waste recyclers certified to AS 5377.
- Western Australia. WA’s e-waste to landfill ban began on 1 July 2024. The WA Government says the regulations refer to AS 5377:2022, which provides guidance on what counts as “reasonable” conduct when handling e-waste.
- Victoria. E-waste has been banned from landfill since 1 July 2019. EPA Victoria’s e-waste guidance refers to AS 5377:2022 as the standard for the collection, transport and treatment of end-of-life equipment. Businesses must also meet the general environmental duty and the waste duties under the Environment Protection Act 2017. See our guide to Victoria’s e-waste landfill ban.
- Procurement. Government agencies, councils and larger companies often require AS 5377 certification in tenders and supplier contracts. This is a contractual requirement, not a legal one.
Who certifies against AS 5377?
Standards Australia writes and publishes the standard. It does not audit or certify recyclers. Certification is issued by independent certification bodies, which audit a facility against the standard and issue a certificate that names the edition of the standard, the activities covered and the sites.
How does AS 5377 relate to other standards?
AS 5377 is specific to e-waste, and it is often used alongside broader management system standards and data sanitisation guidelines:
- ISO 14001 (environmental management systems) covers how an organisation manages its environmental impacts in general.
- ISO 27001 (information security management) covers how an organisation protects information, which is relevant where data-bearing equipment is handled.
- R2 and e-Stewards are international electronics recycling certifications. They cover similar ground with their own requirements.
- NIST SP 800-88 and IEEE 2883 describe how to sanitise storage media. They are not certification standards. See international data destruction standards compared.
What should you ask an e-waste recycler?
Checklist
- Are you lawfully authorised to receive and handle e-waste in Victoria?
- Where does our equipment go after collection, and who processes it downstream?
- What chain of custody records will we receive: serial numbers, weights, collection dates and the final destination of materials?
- How are data-bearing devices identified, stored and sanitised, and to which guideline?
- Will we receive a certificate of sanitisation for each data-bearing device?
- How are lithium-ion batteries handled during collection, transport and storage?
Frequently asked questions
What is the difference between AS/NZS 5377 and AS 5377?
AS/NZS 5377:2013 was the joint Australian and New Zealand edition. AS 5377:2022 is the current Australian edition that replaced it. It has a new title and names preparation for re-use in its scope.
Is AS/NZS 5377:2013 still valid?
It has been superseded in Australia by AS 5377:2022. Some contracts and documents still refer to the 2013 edition, but the edition to cite in Australia is AS 5377:2022.
Is AS 5377 a legal requirement?
Not on its own. It becomes a requirement where a scheme, regulation or contract calls it up. Examples are the NTCRS, which requires certified recyclers, and Western Australia’s e-waste regulations, which refer to AS 5377:2022.
Does AS 5377 cover data destruction?
The 2022 edition lists data security among its topics. The techniques for sanitising storage media are set out in other guidelines, such as NIST SP 800-88 and IEEE 2883, and in the ISM for government.
Where can I get a copy of AS 5377:2022?
It is sold through the Standards Australia store and its licensed distributors. It is not available free of charge.
Does a business need AS 5377 to dispose of its own e-waste?
No. The standard applies to the organisations that collect, transport, refurbish and process e-waste. A business disposing of its own equipment does not need to hold it, but it must still keep e-waste out of landfill and meet its waste duties under the Environment Protection Act 2017.
Planning an equipment disposal?
If you would like to talk through how AS 5377 applies to your equipment, you can request a quote for a collection or email info@ewastevictoria.net.au.
Related reading
- Victoria’s E-Waste Landfill Ban Explained
- Chain of Custody Documentation for Data Destruction
- E-Waste Laws and Regulations in Australia
- Lithium Battery Fires in E-Waste: Safety Challenges
Sources
- Standards Australia, AS 5377:2022 Management of electrical and electronic equipment for re-use or recycling (published 21 January 2022). Record details, abstract and supersession history as listed by licensed distributor Intertek Inform.
- Standards New Zealand, DR AS/NZS 5377:2022 (public comment 31 July to 4 September 2025).
- Department of Climate Change, Energy, the Environment and Water, NTCRS factsheet: co-regulatory arrangements.
- Government of Western Australia, E-waste to landfill ban in WA (updated 17 September 2026).
- EPA Victoria, Electronic waste (updated 9 May 2025).
